Home · Installation
Installation guide
A general guide for a safe assembly. Our team advises you on your specific project.
Step by step
Install your roof in 4 steps
Follow these basic recommendations for a solid, leak-free roof.
1
Prepare the structure
Check that purlins and supports are level and correctly spaced for the chosen gauge.
2
Place the sheets
Set the first tile square and overlap forward against the prevailing wind.
3
Fasten with screws
Use self-drilling screws on the profile crests, without overtightening, to avoid leaks.
4
Finish with accessories
Install ridge caps, valleys and flashings to seal ridges, junctions and edges.
Recommendations
So your roof lasts
- Respect the minimum recommended slope for the tile profile.
- Use the correct overlap between sheets to avoid leaks.
- Use the right fasteners and accessories; never reuse damaged fixings.
- Handle the sheets carefully so you do not scratch the finish.
Questions about your project? We advise you for free before and during installation.
Ask for guidanceInstallation questions?
Write to us and we will guide you step by step for your roof.